| [1]Taher NM, Al Jabab AS.Galvanic corrosion behavior of implant suprastructure dental alloys[J].Dent Mater,2003,19(1):54-59.[2]宋应亮，徐君伍，马轩祥，等.骨内种植体覆盖螺丝的缝隙腐蚀研究[J].中国口腔种植学杂志,1997,2(3):110-112.[3]Cheng FT,Lo KH,Man HC.An electrochemical study of the crevice corrosion resistance of NiTi in Hanks’ solution[J].J Alloys Compounds,2007,437(1-2):322-328.[4]Zaffe D,Bertoldi C,Consolo U.Element release from titanium devices used in oral and maxillofacial surgery[J].Biomaterials,2003,24(6):1093-1099.[5]Bessho K,Iizuka T.Clinical and animal experiments on stress corrosion of titanium miniplates[J].Clin Mater,1993,14(3):223-227.[6]Kumar S, Sivakumara B, Narayanana TS，et al.Fretting-corrosion mapping of CP-Ti in Ringer’s solution. [J].Wear,2010,268(11-12):1537-1541.[7]宋应亮，徐君伍，马轩祥，等.牙龈卟啉菌381对纯钛及钛75合金种植体表面失泽的腐蚀[J].第四军医大学学报,2000,21(8):915-917.[8]王国平，陈宁，万林忠，等.种植义齿失败原因的探讨[J].中国口腔种植学杂志,2002,7(4):172-174.[9]何慧明，朱娟芳，王少海，等.激光焊接对钛耐应力腐蚀性能影响的实验研究[J].口腔医学,2005,25(6):324-325.[10]张少锋，马轩祥，张铁，等.种植全口义齿的三维有限元分析——种植体颈狭部直径对应力的影响[J].实用口腔医学杂志,1999,15(3):221-222.[11]Koike J，Shimoyama Y， Fujii H，et al.Characterization of superplasticity in Ti-5，5A1-1 Fe alloys[J].Scr Mater,1998,39(8):1007-1009.[12]杨敏，陈树国，孟令强，等.两种口腔镍铬合金离子析出的体外实验研究[J].现代口腔医学杂志,2007,21(3):300-303.[13]Kumar S, Narayanan TS.Corrosion behaviour of Ti–15Mo alloy for dental implant applications[J].J Dent,2008,36(7):500-507.[14]Al-Mayouf AM，Al-Swayih AA，Al-Mobarak NA, et al.Corrosion behavior of a new titanium alloy for dental implant applications in fluoride media[J].Mater Chem Phys,2004,86(2-3):320-329.[15]Toumelin-Chemla F, Rouelle F, Burdairon G.Corrosive properties of fluoride-containing odontologic gels against titanium[J].J Dent,1996,24(1-2):109-115.[16]Boere G.Influence of fluoride on titanium in an acidic environment measured by polarization resistance technique[J].J Appl Biomater,1995,6(4):283-288.[17]Takemoto S, Hattori M, Yoshinari M，et al.Corrosion behavior and surface characterization of titanium in solution containing fluoride and albumin[J].Biomaterials,2005,26(8):829-837.[18]Huang HH.Effect of fluoride and albumin concentration on the corrosion behavior of Ti-6Al-4V alloy[J].Biomaterials,2003,24(2):275-282.[19]Nakagawa M, Matono Y, Matsuya S, et al.The effect of Pt and Pd alloying additions on the corrosion behavior of titanium in fluoride-containing environments[J].Biomaterials,2005,26(15):2239-2246.[20]Metikos-Hukovi? M, Kwokal A, Piljac J.The influence of niobium and vanadium on passivity of titanium-based implants in physiological solution[J].Biomaterials,2003,24(21):3765-3775.[21]Takemoto S, Hattori M, Yoshinari M,et al.Corrosion mechanism of Ti-Cr alloys in solution containing fluoride[J].Dent Mater,2009,25(4):467-472.[22]高秋妮,邹丽剑.纯钛种植体表面活性化处理研究进展[J].中华整形外科杂志,2005,21(5):387-390. |
